Repaired 8 scrapped 3 and didn't even attempt 1. Threads to damaged from the tap..

Working on the thread repair attempt..

Rob is having Bobby attempt a thread repair..

Chris Broderick to perform work per rework tag 6718 - cm 7/23.

Assigned to Chris Broderick, EC Date: 07/23.

Assigned to Cris Midrigan, EC Date: 07/22.

Assigned to Phil So, EC Date: 07/21.

Qty 19 good. Parts are in the box by the time saver..

Assigned to Jason Newlun, EC Date: 07/17.

19hr run time (1hr per part at 19parts).

Qty 19. 1hr per part.

Can't really lock in the per part run time on these, but I will work on getting a good estimate monday. .

Reached out to Jason N. via teams at 1046am for deburr times.

SPLIT#4 src req & prep ln4 #982009 - cm 7/10.

Assigned to , EC Date: Invalid date.

Planning change completed for rework. Alex to locate parts and move to craftsmanship..

SPLIT#4 src req drafted ln4 #976191, HF SDR #2326509 on cmm spec waiver to close - cm 7/1 .

SPLIT#4 src req ln4 #976191 - cm 6/30.

SDR closure held for repair & verification.

Assigned to Brian Algiers, EC Date: 06/30.

SDR closed, Brian A and Cris M working to ship accepted parts. Will push planning for rework per spaceX shortly.

SDR closure held for repair & verification.

still awaiting SDR closure.

pinged customer for SDR status.

SpaceX reviewing Data for possible acceptance.

customer emailed back list of parts to put on SDR on 6/4, need to figure out qty4 with duplicate SNs (34 & 96) - cm 6/5.

Assigned to AJ Moore, EC Date: 06/06.

Spreadsheet of OOT conditions emailed to customer 6/4/25.

Assigned to Phil So, EC Date: 05/30.

Assigned to Cris Midrigan, EC Date: 05/27.

AJ to submit spreadsheet of all NC conditions of parts - Cris M to compile list and send to AJ.

ecert pass - cm 5/22.

ln5 #951365 - cm 5/21.

Assigned to Cris Midrigan, EC Date: 05/21.

Assigned to Cris Midrigan, EC Date: 05/21.

30 good parts.

Rework complete. 29 good parts on the rack in craftsmanship-5/21.

Reworking O/D. 10mins a part .

Reworking O/D. 10mins a part .

Reworking O/D. 10mins a part.

per Phil, he said we have approval for the parts with the groove features OOT are acceptable, so Jason N. will need to go thru the reports, pull the parts then make a list of other issues for Phil to submit for approval..

Holding for clarification on what out of tolerance dimensions space x is willing to approve-5/16 .

Holding for clarification-5/16.

Assigned to Jason Newlun, EC Date: 05/23.

35 hours and 40 minutes.

Reworking starting with 2 for time study, Internal rework# 6557.

HF SpaceX approval.

New EC: 06/27 (by AJ Moore on 06/24/25 09:53 AM) New EC: 06/23 (by AJ Moore on 06/19/25 09:56 AM) New EC: 06/13 (by Alex Limtiaco on 06/06/25 09:49 AM) New EC: 05/09 (by Alex Limtiaco on 05/06/25 11:22 AM) New EC: 05/06 (by Alex Limtiaco on 05/06/25 11:22 AM) Assigned to AJ Moore, EC Date: 04/30.

AJ to determine quantites/dates to submit parts on SDR. Only 1 conforming part, remaining quantity is OOT and not reworkable..

Need more input from group - S/R may be necessary.

1 conforming (reworked) part left, remaining balance is not reworkable and will require SDR.

Assigned to Phil So, EC Date: 04/28.

Parts are with Chris M. 1 good and 1 not reworkable-4/24.

We only have 2 parts that can possibly be reworked. EC-4/24.

New EC: 07/18 (by Emily Marshall on 07/17/25 06:05 AM) Assigned to Jason Newlun, EC Date: 04/24.

6 parts to be reworked by JN.

Assigned to Jason Newlun, EC Date: 04/21.

Reworkable SNs: 34, 44, 50, 64, 69, 80, 89, 92, 101, 108, 124, 138, 155. Total QTY reworkable: 13.

Assigned to Shane Warnock, EC Date: 04/17.

Quality to segregate parts - only recoverable parts must ONLY be out on the OD by <.0003. Multiple issues, or larger OD not reworkable..

HF tomorrow when Jason returns and will train the team on what to do.

New EC: 04/24 (by Alex Limtiaco on 04/22/25 08:51 AM) New EC: 04/17 (by Alex Limtiaco on 04/17/25 10:45 AM) Assigned to Jason Newlun, EC Date: 04/16.

qty 3 shipped, packslip 67490. rest of the parts in MRB still - cm 4/14.

ecert req ln4 on WO -08 #928030 - cm 4/10.

SPLIT #1 QTY 3 ready for source prep.

move to source, 3 accepted. .

SW + JN + WM working on getting 3 full & good data sets for source - cm 4/10 .

Assigned to Shane Warnock, EC Date: 04/10.

SW + JN working on getting 3 full & good data sets for source - cm 4/10.

New EC: 05/29 (by Alex Limtiaco on 05/27/25 03:47 PM) Assigned to Cris Midrigan, EC Date: 04/10.

3 parts with Cris to prepare for source.

Discussion conducted - Jason working one and working with CMM team for conformance.

Discuss at MRB 3/28.

Blocked - no clear path forward on rework method. Burnishing tool was determined as best possible approach and is tearing the black anodize off the base material..

Phil to Discuss other recovery options with JN.

New EC: 06/03 (by Alex Limtiaco on 06/03/25 09:48 AM) New EC: 04/08 (by Phil So on 04/07/25 10:50 AM) New EC: 03/27 (by Phil So on 03/27/25 10:08 AM) New EC: 03/25 (by Phil So on 03/24/25 11:07 AM) Assigned to Phil So, EC Date: 03/24.

Rework attempt unsuccessful. .

New EC: Invalid date (by Jake Gardner on 12/17/24 01:32 PM) Assigned to , EC Date: Invalid date.

Machine: Tool Check Material: Closed <i class="fa-sharp fa-solid fa-shield-check text-success"></i> Hardware: NA <i class="fa-sharp fa-solid fa-shield-check text-success"></i> Mod: Closed <i class="fa-sharp fa-solid fa-shield-check text-success"></i> Since Planned: 0 days Since Last Moved: 2 days .

With Kristy to Release.

Anna Prepping to Release.

Assigned to , EC Date: Invalid date.

Assigned to Emily Marshall, EC Date: 10/16.

Ready to Release.

Burnishing tool on order. 2-4 week lead time..

New EC: 10/13 (by Dustin Laberta on 10/11/23 08:41 PM) Assigned to Aaron McMonigle, EC Date: 10/11.

Looking into burnishing tool EC 10/11.

Aaron programming for rework. EC 10/6.

Aaron programming for rework. EC 10/5.

Waiting on REWORK Programming.

Emily Planning.